AP Router- High Power 3G/ 802.11 B/G/N Indoor Router (MN-7616U(600mW))

MN-7616U

Overview

High Power 3G/ 802.11 B/G/N Indoor Router

MN-7616U(600mW)

High Power 3G/ 802.11 B/G/N Indoor Router

MN-7616U(600mW)

•Support advanced 1 x 1 Technology with up to 150Mbps downstream and upstream
•Complies with 2.4GHz IEEE802.11 b/g/n standards
•Low Noise Amplifier(LNA) support
•Support 20MHz and 40 MHz bandwidth
•Operation mode: Bridge, Gateway, WISP
•Wireless mode: AP, Client, WDS
•DHCP Server/Client
•RF output power adjustable
•Virtual DMZ, Port Forwarding, Dynamic DNS
•Firewall, URL/IP/Port/MAC filtering
•Wireless users access control
•NTP client
•Wireless security - WEP, WPA TKIP, WPA2 AES, ACL
•Support PPPoE, VPN pass-through(L2TP, IPSec and PPTP)
•QoS enhancement – WMM
•WPS Hardware button
•Support 3G connection(via 3G USB dongle)

Wireless LAN Standard
IEEE 802.1 b/g/n
Support 3G Standard
UMTS/ HSDPA / HSUPA/ CDMA
Chipset – Ralink RT3050F
Frequency Band
802.11 b/g/n:2.400GHz ~ 2.484GHz
Operation Mode
Bridge
Gateway
WISP
Wireless Mode
AP
Client
WDS
Security
64/128 bit WEP
WPA(TKIP with IEEE 802.1x)
WPA2(AES with IEEE 802.1x)
Data Rate
802.11b:11,5.5,2 and 1 Mbps with auto-rate fall back
802.11g:54,48,36,24,18,12,9&6Mbps
802.11n:(20MHz):up to 72Mbps
802.11n:(40MHz):up to 150Mbps
Media Access Control
CSMA/CA
Interface
1 WAN+ 2 LAN 10/100Mbps port
1 USB 2.0 port (for 3G USB Dongle connection)
Connector
One antenna connector
One RJ-45 port for WAN
Two RJ-45 LAN port
USB(for 3G dongle)
Reset to default button
WPS button
Power jack
Antenna
One SMA connector
Operation Temperature
0°C ~ 60°C
Storage Humidity
10% ~ 90% (Non-condensing)
Sensitivity
-94dBm @ 802.11b
-91dBm @ 802.11g
-89dBm @ 802.11n
Output Power(Typical)
802.11b: up to 27 ± 1 dBm
802.11g: up to 26 ± 1 dBm
802.11n: up to 22 ± 1 dBm
Power requirement
12V DC/1.5A