High Power Products- High Power Outdoor AP Router/USB Adaptor- Outdoor Long Range 802.11a/n 5GHz Wireless AP/CPE(MN-2596K)

MN-2596K

Overview

Outdoor Long Range 802.11a/n 5GHz Wireless AP/CPE/Bridge(2T2R)

MN-2596K

Outdoor Long Range 802.11a/n 5GHz Wireless AP/CPE/Bridge(2T2R)

MN-2596K

•Wireless Standards : IEEE 802.11a/n.
•Data transmission rate up to 300 Mbps at 40 MHz bandwidth.
•Operation Mode: Bridge/Wireless ISP.
•Wireless Mode: AP/Station/WDS AP/WDS Station.
•Reliable data security including WEP, WPA/WPA2,WPA-PSK/RADIUS, and WPA2-PSK/RADIUS with TKIP/AES encryption.
•DFS (Dynamic Frequency Selection) Channel supported (for EU version).
•Support SNMP V2 management, SSH, NTP, and Telnet.
•Support QoS bandwidth control.
•MAC Access Control.
•Built-in Web-based management and firmware upgrade.
•PoE pass through available on Secondary Ethernet port (Configurable via Web UI).
•Remotely enable system reset by PoE Injector.

Wireless Solution (Chipset)
Atheros AR9344
Flash ROM / SDRAM
8MB/64MB
Interface
One 10/100 Base Ethernet Port as Main
One 10/100 Base Ethernet Port as Secondary
Reset button
Earth Ground
Antenna
14 dBi Dual Polarization, Directional
antenna
Data Rate
802.11a: up to 54Mbps
802.11n (20MHz): up to 144Mbps
802.11n (40MHz): up to 300Mbps
Channel Bandwidth
20MHz / 40MHz
Frequency Band
5.180 ~ 5.825GHz
Modulation
OFDM
Media Access Control
CSMA/CA
RF Output Power
802.11a: up to 25± 1 dBm
802.11n: up to 24± 1 dBm
Sensitivity
-94dBm @ 802.11a
-93dBm @ 802.11n
Operation Temperature
-20°C ~ 70°C
Storage Temperature
-30°C ~ 80°C ambient temperature
Humidity
0 ~ 90% typical
Power Consumption
12W (Maximum)
Power Requirement
Passive PoE (DC 24V 1A) input
Certification
FCC, CE